# metrology-toolbox-mcp

Source: https://glimind.com/server/npm%2Fmetrology-toolbox-mcp
Registry id: `npm/metrology-toolbox-mcp`
Status: unknown

## Install

```json
{
  "mcpServers": {
    "metrology-toolbox-mcp": {
      "command": "npx",
      "args": [
        "-y",
        "metrology-toolbox-mcp"
      ]
    }
  }
}
```

Claude Code:

```sh
claude mcp add metrology-toolbox-mcp -- npx -y metrology-toolbox-mcp
```

## Tools (34)

- `air_density`: Moist-air density by CIPM-2007 equation.
- `budget_templates`: Starting uncertainty budgets for common calibrations.
- `buoyancy_correction`: Buoyancy correction of a weight comparison.
- `conformity_decision`: Conformity of one measured value per a named decision rule.
- `conventional_mass`: Conventional mass from true mass and density, or reverse.
- `convert_pressure`: 13 pressure units, factors from SI definitions.
- `convert_torque`: 9 torque units.
- `deadweight_tester_mass`: Total mass to load for a target pressure.
- `deadweight_tester_pressure`: Pressure balance pressure from masses (EURAMET cg-3).
- `differential_expansion`: Differential expansion between UUT and standard.
- `evaluate_test_point`: One call for a whole test point with tolerance, TUR, decision rule, and certificate-ready value.
- `guard_band_global_risk`: Global PFA and PFR from TUR and EOPR for any guard band.
- `humidity_convert`: One humidity quantity to all others at stated temperature and pressure.
- `length_to_20c`: Length corrected to 20 °C reference temperature.
- `liquid_head_correction`: Head Δp from fluid density, gravity, and height difference.
- `local_gravity`: GRS80 normal gravity from latitude (Moritz).
- `monte_carlo_uncertainty`: Monte Carlo evaluation of uncertainty with adaptive trials.
- `round_for_certificate`: U to 2 significant figures, result rounded, copy-ready statement.
- `round_value`: Decimal rounding: half up or half to even, decimals or significant figures.
- `rtd_resistance_from_temperature`: Pt100/Pt1000 resistance from temperature (Callendar–Van Dusen).
- `rtd_temperature_from_resistance`: Temperature from RTD resistance.
- `saturation_vapour_pressure`: Saturation vapour pressure over water or ice.
- `spec_to_tolerance`: Accuracy spec to limits, half-width and standard uncertainty.
- `taxonomy_get_taxon`: Full taxon record: result quantity, parameters, references, deprecation, neighbours.
- `taxonomy_list_disciplines`: Disciplines in the taxonomy with taxon counts.
- `taxonomy_search`: Find NCSLI MII measurand taxa by words, discipline or Measure/Source.
- `thermocouple_cold_junction_compensation`: Hot-junction temperature from meter reading and reference-junction temperature.
- `thermocouple_emf_from_temperature`: Types B, E, J, K, N, R, S, T: mV from temperature (NIST ITS-90).
- `thermocouple_temperature_from_emf`: Temperature from mV for any of those types, with NIST's error band.
- `torque_extension_setting`: Wrench setting for an inline extension.
- `tur_check`: TUR per ANSI/NCSL Z540.3, symmetric, asymmetric or one-sided.
- `uncertainty_budget`: GUM budget: Type A and Type B rows with sensitivity coefficients.
- `usp41_repeatability`: USP <41> repeatability with 0.41d floor and pass/fail.
- `weight_tolerance_check`: A weight's error against MPE per a named decision rule.

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.