# Thegrateguys Tools MCP server

Source: https://glimind.com/server/mcp-registry%2Fcom.thegrateguys%2Ftools
Registry id: `mcp-registry/com.thegrateguys/tools`
Status: live (checked 2026-11-22T17:17:33.434Z)

## Measurements (30 days)

- Uptime: 100%
- Checks: 733
- Outages (90 days): 0

## Install

```json
{
  "mcpServers": {
    "thegrateguys-tools-mcp-server": {
      "type": "http",
      "url": "https://thegrateguys.com/mcp"
    }
  }
}
```

Claude Code:

```sh
claude mcp add --transport http thegrateguys-tools-mcp-server https://thegrateguys.com/mcp
```

## Tools (15)

- `accessible_grating_opening_checker`: Checks the clear opening between bearing bars against the Ontario Building Code 13 mm limit for barrier-free paths of travel, and the widest bar spacing that wo
- `aluminum_stainless_bar_grating_load_calculator`: Safe load, deflection and the lightest bearing bar for aluminum 6063-T6 and stainless 304, 316, 304L and 316L bar grating at 1-3/16 in bar centres.
- `bar_grating_load_calculator`: Finds the lightest welded steel bearing bar (19-W-4 or 15-W-4, smooth or serrated) that carries a clear span and load within a deflection limit.
- `bar_grating_load_tables`: Looks up the safe uniform load (U), safe concentrated load (C), deflections and weight for welded steel bar grating by bearing bar size and span.
- `bollard_spacing_and_footing_calculator`: Counts the bollards for a frontage and clear gap, checks the gap against vehicle and wheelchair guidance, gives typical footing and concrete for a standard (not
- `catch_basin_grate_and_frame_size_finder`: Names the Ontario Provincial Standard Drawing for a catch basin inlet type, checks the grate bearing on the frame ledge against the NAAMM minimum, gives the ran
- `fence_and_gate_post_spacing_and_weight`: Post count and spacing for a chain link or ornamental steel fence run, chain link footing depth and gate post size, and the weight and hinge loads of an ornamen
- `galvanizing_coating_thickness_calculator`: Minimum average hot-dip galvanized coating grade by steel category and thickness, in mils, microns and ounces of zinc per square foot, with total zinc for a sur
- `guard_and_railing_code_checker_ontario`: Whether a guard is required, its minimum height, opening limit, climbing rule and design loads under the Ontario Building Code Part 9 and Part 3 for a described
- `loading_dock_height_and_leveler_check`: The grade a dock leveler works at between the lowest and highest truck bed you serve, against the 10% (electric) and 15% (gas or diesel) limits, the shortest st
- `steel_beam_lintel_span_check`: The steel angle lintel or steel beam that the 2024 Ontario Building Code Part 9 tables list for an opening width in a brick or stone veneer wall or a masonry wa
- `steel_stair_calculator_ontario`: Allowed riser counts, riser height, tread run, flights, width, headroom and handrail height for a total rise under Ontario Building Code Part 9.
- `steel_weight_calculator`: Theoretical weight of carbon steel plate, flat bar, round bar, square bar, angle, square or rectangular tube and round pipe, in pounds and kilograms.
- `trench_drain_flow_capacity_calculator`: The flow a trench drain has to handle from a paved area (rational method with Toronto City rainfall rates from Environment and Climate Change Canada) and the fl
- `trench_drain_grate_load_class`: The EN 1433 load class, A 15 to F 900, and its test load in kN for where a trench drain goes and what drives or rolls over it.

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
