# Renderior MCP server

Source: https://glimind.com/server/mcp-registry%2Fcom.renderior%2Frenderior
Registry id: `mcp-registry/com.renderior/renderior`
Status: live (checked 2026-11-22T17:23:13.001Z)

## Measurements (30 days)

- Uptime: 100%
- Checks: 959
- Outages (90 days): 0

## Install

```json
{
  "mcpServers": {
    "renderior-mcp-server": {
      "type": "http",
      "url": "https://renderior.com/mcp"
    }
  }
}
```

Claude Code:

```sh
claude mcp add --transport http renderior-mcp-server https://renderior.com/mcp
```

## Tools (22)

- `bar_stool_height`: What seat height of stool suits a counter or bar (10 to 12 inches below its top), and how many stools fit along it. Gives the designer rule of thumb; the page l
- `bathroom_mirror_size`: How wide a bathroom mirror should be for a vanity (70 to 90 percent of its width, one per sink for a double vanity) and how high its bottom edge goes. Gives the
- `bench_size`: The end-of-bed bench length for a bed size (4 to 8 inches of bed showing at each end), its height from the mattress top, the usual depth, and whether the space 
- `ceiling_fan_size`: What blade span of ceiling fan suits a room, from its floor area (two makers' charts), and which mount suits the ceiling height. Gives the designer rule of thum
- `chandelier_size`: What diameter and height of chandelier suits a room, and how far it should hang. Over a dining table, the diameter follows the table's width instead of the room
- `christmas_tree_size`: The tallest Christmas tree that fits under a ceiling with a topper and stand, leaving a gap above, and how wide it will be. Gives the designer rule of thumb; th
- `coffee_table_size`: How long and tall a coffee table should be for a sofa, and how wide for the room. Length is half to two thirds of the sofa; height is 1 to 2 inches below the se
- `curtain_length`: Curtain panel length, the stock length to buy, rod width and total fabric width for a window. Style is how the curtain meets the floor: float, kiss, break or pu
- `dining_table_size`: The largest rectangular and round dining table that fits a room with room to pull out chairs, and how many people each seats. Gives the designer rule of thumb; 
- `dresser_size`: The widest and deepest dresser that fits a bedroom wall: the wall space less an inch each side, and the distance to the bed less 36 inches of clearance to open 
- `headboard_size`: The headboard width for a bed size (2 to 4 inches wider than the mattress), the typical height above the mattress, the height from the floor, and whether the wa
- `list_visualizers`: The kinds of products Renderior can show in a photo of the person's own space (furniture, sofas, lighting, patio furniture, vanities, front doors), each with it
- `nightstand_size`: How tall a nightstand should be for a mattress (level with its top to 2 inches above; 3 inches either way still works), the typical width for the bed size, dept
- `outdoor_rug_size`: The standard outdoor rug size for a patio dining table (24 to 30 inches of rug past the table on every side) or a lounge set (every leg on the rug, 12 to 24 inc
- `patio_umbrella_size`: What size patio umbrella covers a table and its chairs, from the table's shape and size, and how heavy a base it needs. Gives the designer rule of thumb; the pa
- `pendant_spacing`: How many pendant lights to hang over a kitchen island, how far apart, how far in from the ends, and how high above the counter. Gives the designer rule of thumb
- `room_size`: A rectangular room's square feet, square meters, square yards and perimeter from its length and width in feet and inches, plus wall area and volume when the cei
- `rug_size`: Which standard rug size fits a living room (from the room's size, leaving bare floor at the walls) or goes under a dining table (from the table's size, so chair
- `sofa_size`: How long a sofa should be for a wall (about two-thirds of it; half to two-thirds is the range), what kind of sofa that is, the clearances around it, and the lar
- `vanity_light_size`: How wide a bathroom vanity light over the mirror should be (80 to 90 percent of the mirror), how high to mount it, the ceiling clearance, and whether sconces be
- `wall_art_size`: How wide wall art over a sofa, bed or console should be (two-thirds to three-quarters of it), how high to hang it, and how tall it can be to center at 57 to 60 
- `wall_sconce_height`: How high to mount wall sconces in a hallway or room (center 60 to 65 inches up, 66 to 72 under ceilings over 9 feet) and how many to space along a wall, 8 to 10

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
