# Perfboarddesigner MCP server

Source: https://glimind.com/server/mcp-registry%2Fcom.perfboarddesigner%2Fmcp
Registry id: `mcp-registry/com.perfboarddesigner/mcp`
Status: live (checked 2026-11-22T17:36:41.439Z)

## Measurements (30 days)

- Uptime: 99.83%
- Checks: 1020
- Outages (90 days): 2

## Install

```json
{
  "mcpServers": {
    "perfboarddesigner-mcp-server": {
      "type": "http",
      "url": "https://mcp.perfboarddesigner.com/mcp"
    }
  }
}
```

Claude Code:

```sh
claude mcp add --transport http perfboarddesigner-mcp-server https://mcp.perfboarddesigner.com/mcp
```

## Tools (12)

- `edit_project`: Changes a project kept here, by a list of ops applied in order: add_part, update_part (move, turn, change value or ref), remove_parts, add_wire (from/to, or a `
- `get_nets`: Which pins the board connects: every net with its name (from its pins, e.g. GND), its pins ("U1.8 VCC" for a chip's pin, "D1.K" or "C1.+" for a polarized lead, 
- `get_part`: Everything needed to place parts: for each, which project file list it goes in, its pins (offsets from pin 1 at rotation 0) and pin labels, polarity, value unit
- `get_pin_positions`: Where every placed part's pins land, as [column, row] holes, with pin numbers and labels (e.g. U1 pin 8 VCC), after rotation, plus holes a part's body covers. U
- `get_project`: The whole project file of a project kept here, as the editor would save it (through version 8, preserving component identities and optional requirements), one e
- `list_parts`: Lists the parts a project can place. Without a query: every part, grouped by category, as its id with its name and pin count; call it this way once to see what 
- `make_share_link`: Turns a project into a link that opens it in Perfboard Designer: the project travels inside the link, so it works without any server. Give the link to the user.
- `new_project`: Starts a project kept here under a projectId: a blank board, or one of the example projects (perfboard://examples/...) to copy from. Returns the projectId and t
- `read_share_link`: Reads the project out of a Perfboard Designer share link (z=, json=, downloaded src=, or a stored short link). Returns a project file through version 8, preserv
- `render_board`: Draws the board as text, one cell per hole with column and row numbers: each part's pins by a key letter and pin number (a1, a2...), holes under a part's body, 
- `show_board`: Shows the user a picture of the board right in the conversation, as the editor draws it, with a button that opens it in Perfboard Designer. Only in clients that
- `validate_project`: Checks a project file and lists every problem with where it is: entries the editor would leave out, unknown parts, pins off the board, two parts' pins or leads 

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
