# Checkfitment MCP server

Source: https://glimind.com/server/mcp-registry%2Fcom.checkfitment%2Fcheckfitment
Registry id: `mcp-registry/com.checkfitment/checkfitment`
Status: live (checked 2026-11-22T19:00:48.657Z)

## Measurements (30 days)

- Uptime: 99.97%
- Checks: 6638
- Outages (90 days): 1

## Install

```json
{
  "mcpServers": {
    "checkfitment-mcp-server": {
      "type": "http",
      "url": "https://checkfitment.com/mcp?src=mcp"
    }
  }
}
```

Claude Code:

```sh
claude mcp add --transport http checkfitment-mcp-server https://checkfitment.com/mcp?src=mcp
```

## Tools (6)

- `bolt_pattern_facts`: Use for "what is 5x114.3 in inches", "is 5x114.3 the same as 5x115", "will 6x135 wheels fit 6x139.7", or which vehicles use a pattern. Converts mm and inch nota
- `bolt_pattern_lookup`: Use for "what is the bolt pattern on a 2019 Ford F-150", lug torque, center bore, thread size, OEM wheel size, offset or tire size of a vehicle, or "will these 
- `gear_ratio_calculator`: Use for "what does my 3.73 axle behave like on 35s", "what ratio do I need to regear for 33s", RPM at highway speed after a tire change, or the crawl ratio (wit
- `tire_size_compare`: Use for "what changes if I go from 265/70R17 to 285/75R17", "how far off is my speedometer with 33s", or odometer error after a tire change. Returns diameter, w
- `wheel_fitment_check`: Use to compare a current wheel (and tire) with a new one: how far the outer edge pokes toward the fender and the inner edge toward the suspension, the diameter 
- `wheel_spacer_calculator`: Use for "do I need spacers", "what spacer gets +35 wheels to +20", "is a 10 mm slip-on spacer safe". A spacer lowers the effective offset by its thickness. Retu

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
