# wmm246/fpga-mcp

Source: https://glimind.com/server/glama%2Fwmm246%2Ffpga-mcp
Registry id: `glama/wmm246/fpga-mcp`
Status: unknown

## Tools (80)

- `add_constraint_file`: Add a single constraint file.
- `add_constraints`: Add constraint files (.xdc/.sdc/.qsf/.fdc) to the project.
- `add_source_file`: Add a single Verilog/VHDL/SystemVerilog source file.
- `add_sources`: Add HDL source files to the active project.
- `append_to_file`: Append content to file.
- `close_project`: Close the active backend's currently-open project (if any).
- `connect_hardware_server`: Connect to hw_server.
- `create_clock_constraint`: Define a primary clock.
- `create_constraint_file`: Create new XDC file.
- `create_io_constraint`: Pin assignment + I/O standard.
- `create_ip`: Instantiate a vendor IP core.
- `create_project`: Create a new FPGA project on the active backend.
- `create_source_file`: Create new Verilog/VHDL file with template.
- `current_project`: Return info about the currently-open project on the active backend.
- `disconnect_hardware`: Disconnect from hardware.
- `exec_tcl`: Run an arbitrary backend-native Tcl command (escape hatch).
- `export_hardware`: Export hardware definition (.xsa) for embedded development.
- `generate_bitstream`: Generate the bitstream for the active project.
- `generate_ip`: Generate the IP's synthesis targets / output products.
- `get_all_clocks`: List all defined clocks.
- `get_clock_info`: Get clock period, waveform, sources.
- `get_project_info`: Get project name, part, directory, top module, status.
- `get_run_status`: Check run status (synth/impl).
- `get_synthesis_report`: Get synthesis utilization summary.
- `list_all_files`: List project files.
- `list_backends`: List the EDA backends this MCP server can drive.
- `list_constraint_files`: List all constraint files.
- `list_hardware_devices`: List devices on target.
- `list_hardware_targets`: List JTAG targets.
- `list_source_files`: List all source files in the project.
- `open_hardware_manager`: Open Hardware Manager.
- `open_hardware_target`: Open target.
- `open_project`: Open an existing FPGA project.
- `ping_backend`: Check whether the named (or active) backend's Tcl server is reachable.
- `program_device`: Program an FPGA with the given bitstream via JTAG.
- `read_file`: Read file contents.
- `read_file_lines`: Read specific line range.
- `remove_file`: Remove a file from the project.
- `report_drc`: Design Rule Check violations.
- `report_timing`: Report timing on the active project (WNS/TNS/failing paths).
- `report_timing_summary`: Overall timing: WNS, TNS, WHS, THS.
- `report_utilization`: Report resource utilization on the active project.
- `run_implementation`: Run implementation (place & route) on the active backend.
- `run_simulation`: Run a simulation on the active backend.
- `run_synthesis`: Run synthesis on the active backend.
- `save_constraints`: Write constraints to XDC file.
- `set_backend`: Switch the active EDA backend (vivado/quartus/anlogic).
- `set_ip_property`: Set a single property on an existing IP instance.
- `set_top`: Set the top-level module / entity for the active project.
- `set_top_module`: Set the top-level module.
- `status`: Snapshot of every backend's connection + project state.
- `viv_add_bd_cell`: Add an IP cell to the BD.
- `viv_add_bd_cell_block`: Add a block (sub-BD) cell.
- `viv_all_clocks`: Return all clocks (alias).
- `viv_all_dsps`: Return all DSPs.
- `viv_all_ffs`: Return all flip-flops.
- `viv_all_inputs`: Return all input ports.
- `viv_all_latches`: Return all latches.
- `viv_apply_bd_automation`: Run BD automation rule.
- `viv_close_bd`: Close the current block design.
- `viv_connect_bd_intf_net`: Connect two BD interface nets.
- `viv_connect_bd_net`: Connect two BD nets.
- `viv_create_bd`: Create a block design.
- `viv_create_bd_intf_port`: Create a BD external interface port.
- `viv_create_bd_port`: Create a BD external port.
- `viv_current_bd`: Return the current BD handle.
- `viv_delete_bd_cell`: Delete a BD cell.
- `viv_get_bd_cell_property`: Get a property on a BD cell.
- `viv_get_bd_cells`: List all BD cells.
- `viv_get_bd_intf_pins`: List all BD interface pins.
- `viv_get_bd_nets`: List all BD nets.
- `viv_get_bd_pins`: List all BD pins.
- `viv_get_bd_ports`: List BD external ports.
- `viv_make_wrapper`: Generate the BD HDL wrapper as the new top.
- `viv_open_bd`: Open a block design.
- `viv_save_bd`: Save the current block design.
- `viv_set_bd_automation_target`: Set BD automation target.
- `viv_set_bd_cell_config`: Set a CONFIG.* on a BD cell.
- `viv_set_bd_cell_property`: Set a property on a BD cell.
- `viv_validate_bd`: Validate the BD (run consistency checks).

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
