# seayniclabs/bench

Source: https://glimind.com/server/github%2Fseayniclabs%2Fbench
Registry id: `github/seayniclabs/bench`
Status: unknown

## Tools (25)

- `bench_modules`: Lists modules that are on and their tools.
- `chip_detect`: Detect chip type (needs approval).
- `decode_crash`: Decode crash dumps into source lines.
- `device_descriptors`: Get USB device descriptors.
- `diagnose_device`: Diagnose issues with a device.
- `eject_device`: Eject a USB device (needs approval).
- `flash_firmware`: Flash firmware to a board (needs approval).
- `get_device_info`: Get detailed information about a USB device.
- `hid_send`: Send raw HID reports (needs approval).
- `hub_topology`: Show USB hub tree topology.
- `identify_device`: Identify a board and its exact chip.
- `list_serial_ports`: List available serial ports.
- `list_usb_devices`: Enumerate USB devices connected to the Mac.
- `monitor_events`: Monitor USB device events.
- `ping`: Health check for the Bench server.
- `port_reset`: Reset a USB port (needs approval).
- `power_info`: Get power information for USB devices.
- `serial_close`: Close a serial port.
- `serial_monitor`: Monitor serial output continuously.
- `serial_open`: Open a serial port for communication.
- `serial_read`: Read data from a serial port.
- `serial_write`: Write data to a serial port (needs approval).
- `serial_write_and_expect`: Write and expect a response (needs approval).
- `snapshot_state`: Snapshot current device state.
- `tag_device`: Tag a device for identification.

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
