# psampir/packet-tracer-mcp

Source: https://glimind.com/server/github%2Fpsampir%2Fpacket-tracer-mcp
Registry id: `github/psampir/packet-tracer-mcp`
Status: unknown

## Tools (22)

- `add_device`: Add a device; type is a DeviceType name or int
- `autolink`: Connect two devices, letting PT choose cable and ports
- `configure`: Send IOS CLI (string or list) to a device
- `dns_list`: Entries on a DNS server
- `dns_record`: Add/remove a DNS A record with zone SOA/NS
- `get_config`: Read addressing from a device's port(s)
- `http_page`: Start/stop HTTP service or replace a page
- `link`: Cable two ports with optional cable type
- `list_devices`: Every device (name, type, typeName, model) and the link count
- `list_links`: Every cable, one entry per physical link
- `list_ports`: A device's ports with status and link info
- `pc_command`: Type into a PC/server shell and return new output
- `ping`: Ping from a host and parse results
- `power`: Power a device on or off
- `raw`: Escape hatch: evaluate JS in the PT engine
- `remove_device`: Remove a device
- `save`: Save the active .pkt file
- `set_ip`: Set static IPv4 or enable DHCP on a port
- `set_ipv6`: Enable IPv6 on a port with address and optional gateway
- `show`: Run one show/exec command and return the output
- `skip_boot`: Press Skip boot so an IOS device reaches its console
- `status`: Bridge health: PT version + device count of the active file

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
