# N-Erickson/AetherLink-SDR-MCP

Source: https://glimind.com/server/github%2Fn-erickson%2Faetherlink-sdr-mcp
Registry id: `github/n-erickson/aetherlink-sdr-mcp`
Status: unknown

## Tools (30)

- `aviation_get_aircraft`: Get tracked aircraft with callsign, altitude, speed, heading, position, and distance
- `aviation_stop_tracking`: Stop tracking
- `aviation_track_aircraft`: Start ADS-B tracking on 1090 MHz
- `hackrf_set_tx_gain`: Set transmit gain on HackRF
- `ism_get_devices`: Get detected ISM devices (weather stations, sensors, etc.)
- `ism_start_scanning`: Start scanning ISM bands with multi-frequency hopping
- `ism_stop_scanning`: Stop ISM band scanning
- `marine_get_vessels`: Get vessel list
- `marine_stop_tracking`: Stop marine tracking
- `marine_track_vessels`: Start built-in AIS ship tracking on both channels
- `pager_find_frequencies`: Scan VHF/UHF/900 MHz paging bands for likely pager carriers
- `pager_get_messages`: Get decoded messages, newest last, filter by age
- `pager_start_decoding`: Start built-in POCSAG decoding on a frequency
- `pager_stop_decoding`: Stop pager decoding
- `satellite_decode_meteor`: Start Meteor-M LRPT decode with SatDump in background
- `satellite_get_status`: Get progress, results and image list of current/last decode
- `satellite_predict_passes`: Get upcoming Meteor-M passes for your location
- `satellite_stop_decoding`: End a satellite decode early
- `sdr_connect`: Connect to RTL-SDR or HackRF by device index
- `sdr_disconnect`: Stop everything and disconnect
- `sdr_get_status`: Hardware status, running decoders, and who holds the radio
- `sdr_list_devices`: List attached RTL-SDR and HackRF devices with serials
- `sdr_set_bias_tee`: Switch antenna port power for an LNA
- `sdr_set_frequency`: Set center frequency in Hz
- `sdr_set_gain`: Set gain (dB or 'auto')
- `sdr_set_ppm`: Set RTL-SDR frequency correction in PPM
- `sdr_set_sample_rate`: Set sample rate in Hz
- `signal_generator`: Generate and transmit signals
- `spectrum_analyze`: Analyze RF spectrum (FFT, signal detection)
- `spectrum_scan`: Scan frequency range

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
