# kiskander/pt-mcp-server

Source: https://glimind.com/server/github%2Fkiskander%2Fpt-mcp-server
Registry id: `github/kiskander/pt-mcp-server`
Status: unknown

## Tools (46)

- `add_circle_annotation`: Draw a circle.
- `add_device_to_network`: Add a device, optionally named and positioned.
- `add_line_annotation`: Draw a line.
- `add_module_to_device`: Install a module (e.g. HWIC-2T) and return the new ports.
- `add_text_note`: Add a text note.
- `call_ipc_api`: (opt-in) Call the raw IPC API; still limited to verified methods.
- `configure_device`: Apply an IOS config block (handles show run output and sub-modes).
- `configure_host_interface`: IP, mask, gateway, DNS, or DHCP on PCs, servers, and laptops.
- `connect_two_devices`: Cable two ports (auto picks serial, console, straight-through, or crossover).
- `create_full_network_topology`: Build a whole lab (devices, modules, links, host IPs, IOS configs) in one call.
- `create_new_network`: Start a new, empty network (asks for confirmation).
- `delete_annotation`: Delete a note or shape (asks for confirmation).
- `delete_device_from_network`: Delete a device and its cables (asks for confirmation).
- `delete_link`: Remove the cable on a port (asks for confirmation).
- `describe_ipc_class`: Look up the methods and wire types of any Packet Tracer IPC class (offline).
- `edit_text_note`: Change a note's text.
- `erase_device_configuration`: Erase startup-config and reload to a blank config (asks for confirmation).
- `export_network_topology`: Export the open network (with configs) in the same format, for rebuilding or review.
- `get_activity_instructions`: Read a .pka activity's instruction pages as plain text (not answers or scores).
- `get_all_links`: Every cable with both ends and its type.
- `get_annotations`: Notes, lines, and shapes on the workspace.
- `get_command_history`: Packet Tracer's log of commands typed into terminals.
- `get_console_log`: The device's console buffer (boot and link messages).
- `get_device_configuration`: Read the running-config or startup-config.
- `get_device_model_details`: Show slots (installed or empty) and every supported module with its description.
- `get_device_models`: List models for a device type (router, switch, pc, server, …).
- `get_devices_in_network`: List devices with type, model, power, and position.
- `get_interfaces_for_device`: Ports with status, MAC, IP/mask, and the remote device/port.
- `get_pt_information`: Connection check: Packet Tracer version, device/link counts, workspace mode, open file.
- `get_simulation_event_details`: Packet Tracer's OSI-layer explanation of an event plus decoded headers.
- `get_simulation_events`: The event list: where each PDU is, where it came from, protocol, and what happened.
- `open_network_file`: Open a .pkt or .pka.
- `remove_module_from_device`: Remove a module (asks for confirmation).
- `rename_device`: Change a device's display name.
- `reset_simulation`: Clear the event list.
- `save_device_configuration`: write memory.
- `save_network_file`: Save the network as a .pkt.
- `send_cli_command`: Run IOS commands in exec or config mode, with per-command status and output.
- `send_simple_pdu`: Send an ICMP PDU between two devices (the envelope tool).
- `send_terminal_command`: Run a command in a PC/server Command Prompt and collect the output.
- `set_device_power`: Power a device on or off.
- `set_interface_power`: Turn a single port on or off.
- `set_network_description`: Set the file's description (objectives, addressing table…).
- `set_simulation_mode`: Switch between Realtime and Simulation.
- `step_simulation`: Step forward or backward.
- `verify_connectivity`: Ping a list of destinations from a device and report sent/received/loss.

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
