# cezman/ironharness

Source: https://glimind.com/server/github%2Fcezman%2Fironharness
Registry id: `github/cezman/ironharness`
Status: unknown

## Tools (27)

- `echo`: Echoes back the input text.
- `esp_erase`: Erases flash on an ESP32 board.
- `esp_flash`: Flashes firmware to an ESP32 board.
- `esp_image_info`: Inspects an ESP32 firmware image offline.
- `file_delete`: Deletes a file within the sandbox.
- `file_list`: Lists files within the sandbox.
- `file_read`: Reads content from a file within the sandbox.
- `file_write`: Writes content to a file within the sandbox.
- `modbus_close`: Closes a Modbus connection.
- `modbus_open`: Opens a Modbus connection.
- `modbus_read`: Reads data over Modbus.
- `modbus_write`: Writes data over Modbus.
- `mqtt_close`: Closes an MQTT connection.
- `mqtt_open`: Opens an MQTT connection.
- `mqtt_publish`: Publishes a message to an MQTT topic.
- `mqtt_read`: Reads a message from MQTT.
- `mqtt_subscribe`: Subscribes to an MQTT topic.
- `serial_close`: Closes a serial port connection.
- `serial_open`: Opens a serial port connection.
- `serial_read`: Reads data from a serial port.
- `serial_read_line`: Reads a line from a serial port.
- `serial_read_until`: Reads from serial until a specified pattern is found.
- `serial_reader_start`: Starts a background reader for serial output buffering.
- `serial_reader_stop`: Stops the background serial reader.
- `serial_reset`: Performs an RTS-pulse board reset.
- `serial_tail`: Retrieves buffered serial output from the background reader.
- `serial_write`: Writes data to a serial port.

Measured by Glimind (https://glimind.com): MCP handshake + tool list only, no tool is ever called. CC BY 4.0.
